High Temperature Protective Coatings
For Over 95 Years.

About Us
Product Line
Case Histories
Dampney Brochures
Technical Sheets
Contact Us
 Product Line     March 30, 2015  
Product Line
Home » Alvin Products » Product Details

Metal Repair Putty

Ready-to-use metal repair putty, dent filler and patching compound. Lab-metal ready-to-use repair compound spreads like paste and hardens quickly into metal.
Data Sheet

Aluminum-filled, one-part repair putty. Durable metal filler for fast, permanent repairs. Fills dents and flaws easily and economically.  Proven in unlimited applications! A unique, quality problem-solver!




Easy to use

Lab-metal fills dents and flaws in metal and nonmetal parts easily and economically. Apply Lab-metal right from the can with a putty knife or similar tool. No two-component mixing or measuring is necessary, therefore there is no waste. Heat, special tools and specialized skill are unnecessary. Many applications may be made from a single can.

Thin to brush or spray

Lab-metal may be thinned to paint consistency with Lab-solvent and brushed or sprayed on practically any surface to provide a rustproof, water resistant, hard metal finish.

Bonds permanently

Lab-metal adheres to any clean and dry metal, wood, glass, plaster, porcelain and hard plastic surface. Its strong bond withstands vibration and other difficult conditions. Lab-metal hardens quickly without heat, providing a durable metal surface.


Once hardened, Lab-metal can be milled, chiseled, drilled, sawed, tapped and machined. Filing, sanding or grinding Lab-metal to a feather edge provides a smooth metallic repair. Lab-metal will not shrink, crack or peel. Not affected by mild acids, gasoline, oil or petroleum solvents. Lab-metal is aluminum filled, resisting attack of rust, rot and mildew. Lab-metal withstands temperatures as high as 350ºF (and as low as -40oF) and when hard, can be painted with lacquer or enamel without danger of bubbling, lifting paint, chipping or peeling. Lab-metal stands up to normal paint baking procedures and may also be powder coated (see special powder coating instructions).


Efficient, economical

Lab-metal’s true metal hardness is achieved with greater ease than other materials sold for repair and finishing. Lab-metal sells for considerably less than epoxy systems. Its strength, hardness, durability and abrasion resistance surpass basic requirements for fillers set by the nation’s largest metalworking plants. Lab-metal is the repair putty of choice because of its extensive can life, ready-to-use formulation, versatility of applications, and durability.

Common Uses
High Temperature Epoxy for Powder Coating
Epoxy Adhesive for metal castings
Epoxy Putty for Aluminum
Conductive Epoxy for Powder Coating
Wood Epoxy Filler for Filling imperfections
Aluminum Epoxy for metal castings
High Temp Epoxy for Patching
Epoxy Sealant for metal, wood and auto bodies
Engine Block epoxy filler
Epoxy Potting Compound
Silicone Sealant for metal and rough welds
Joint sealant for metal
Head Gasket Sealant and crack repair
Auto Body and filler compound
High Temperature resistant metal patch
High Temperature Adhesive for filling surface defects
High Temperature metal repair compound
Seal Porosity in Castings
Service Conditions
Apply To Hot Surfaces

Contact Details
  Dampney Company
85 Paris Street
Everett, MA 02149
(617) 389-2805
Request More Information
Enter the security code.
Enter the code shown above in the box below
* denotes mandatory field